CNC Fabrication Hybrid Hot Street 238CC Injectors
CNC Fabrication 238CC Hybrid Injectors
CALIFORNIA CARB NOTICE - NOT FOR SALE OR USE IN CALIFORNIA - WEBSITE WILL NOT PROCESS
Shipping: **LEAD TIMES VARY DEPENDING ON WORKLOAD**
These CNC Fabrication, LLC remanufactured Hot Street (238/80, 238/100) hybrid injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke. Commonly called a Stage 3, these "Hot Street" 238cc hybrid injectors will typically produce around 500-550hp with proper supporting modifications depending on the year of your truck. 80% nozzles will give better towing capabilities and run cleaner, 100% nozzles will give a more top end power, more low end torque (good balance of work and fun), 200% nozzles will give the most power but expect EGT's to be higher. These are by far the most popular sized injector to daily drive and give a Camaro a run for it's money. Mainly because a T4 turbo mount is not "necessary", nor are billet rods and a plate girdle.
Features:
- Decent for towing, or wanting a sizeable power increase
- New nozzles
- New Tungsten Coated Plungers and Barrels
- New o-rings
- New springs
- Better than OE specifications
- We do NOT use shims, these injectors are machined to set proper armature clearance
- Each set of injectors will come with flow sheet test results
- Tested on the newest Hartridge flow bench using the latest injector technology
Warranty:
Covered by CNC Fabrication's limited lifetime warranty. Warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed. Warranty VOID if damage is done due to improper care of the purchaser's vehicle, improper fuel, etc. Warranties are non-transferable, and only offered to the original purchaser.
If you have any questions regarding tune selection or descriptions, please refer to this order page. (Click Here)
Original: $2,245.00
-65%$2,245.00
$785.75Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
CNC Fabrication 238CC Hybrid Injectors
CALIFORNIA CARB NOTICE - NOT FOR SALE OR USE IN CALIFORNIA - WEBSITE WILL NOT PROCESS
Shipping: **LEAD TIMES VARY DEPENDING ON WORKLOAD**
These CNC Fabrication, LLC remanufactured Hot Street (238/80, 238/100) hybrid injectors will put new life back into your 94.5-03 7.3L Ford Powerstroke. Commonly called a Stage 3, these "Hot Street" 238cc hybrid injectors will typically produce around 500-550hp with proper supporting modifications depending on the year of your truck. 80% nozzles will give better towing capabilities and run cleaner, 100% nozzles will give a more top end power, more low end torque (good balance of work and fun), 200% nozzles will give the most power but expect EGT's to be higher. These are by far the most popular sized injector to daily drive and give a Camaro a run for it's money. Mainly because a T4 turbo mount is not "necessary", nor are billet rods and a plate girdle.
Features:
- Decent for towing, or wanting a sizeable power increase
- New nozzles
- New Tungsten Coated Plungers and Barrels
- New o-rings
- New springs
- Better than OE specifications
- We do NOT use shims, these injectors are machined to set proper armature clearance
- Each set of injectors will come with flow sheet test results
- Tested on the newest Hartridge flow bench using the latest injector technology
Warranty:
Covered by CNC Fabrication's limited lifetime warranty. Warranty covers any damages done during shipping, prior to installation, and if all installation steps were followed. Warranty VOID if damage is done due to improper care of the purchaser's vehicle, improper fuel, etc. Warranties are non-transferable, and only offered to the original purchaser.
If you have any questions regarding tune selection or descriptions, please refer to this order page. (Click Here)
